Hopkins Tailight Converter Kit Installation - 2010 Land Rover Range Rover Sport- Video
Hi, I'm Shane with etrailer.com. Today I'm going to walk through how to install the Hopkins Active Taillight Converter Kit on your 2010 Land Rover/Range Rover Sport. Adding wiring to your vehicle is going to allow you to pull a trailer. Maybe you have a cargo carrier that when you add the cargo on it, it covers your taillights. This is going to allow you to get those wire functions transferred back to either that cargo carrier or the trailer, so you're legal and safe when you're pulling it.This is going to give us all of our proper lighting functions, brake signals, turn signals and our running lights. You can see here, it's going to mount right here at the back of the vehicle. more
10/24/2019 2:22:18 PM
Trailer Wiring Harness Installation - 2010 Land Rover LR2- Video
Speaker 1: Today on our 2010 Land Rover LR2 we're going to take a look and show you how to install the TEKONSHA Upgraded Circuit Protected ModuLite with 4 Pole Harness and Hardwire Kit. The part number is 119179KIT.Now this upgraded ModuLite kit allows us to add a 4 pole connector to the back of our LR2. Now we have to use the hardwire kit because there just aren't kits readily available on the market that allow you to just have the plug-and-play. Now the importance of having a ModuLite kit rather than just hard-wiring directly to your wires is that this helps to do a few things. This is going to isolate the trailer side from the vehicle side so if there are shorts or failures on your trailer those aren't going to be transferred into your vehicle's lighting system.Also, this is powered by a standalone 12V power source, we're going to run this up to the battery and also grounded to the vehicle's body. It's only using the lighting system of your vehicle for this switch signals. more
7/24/2018 2:17:12 PM
Filter Videos
Filter Videos
